How to Connect to Blue Tooth Headphones on Ma

From the dawn of fourth dimension to just nearly a few years ago, all of us sported a pair of wired headphones and were convinced that this is simply how it will exist done forever. After all, they are the easiest technology around: but plug them in, put them on, and go. Only with proliferation of Bluetooth headphone options and disappearance of headphone jacks from nearly all the latest smartphones, wired headphones seem to progress on the path of disappearance more and more each day.

Thankfully, wireless devices are great. They are lightweight. They are versatile. They tin be easily connected to your iPhone, your Mac, or your car. Charge them overnight merely the same fashion as your phone and they last all mean solar day too.

Sadly, without proper configuration, connecting Bluetooth headphones to Mac might become a scrap tricky, with frequent disconnections and music interruptions. Here, nosotros'll help you discover out how to pair AirPods and other sound devices with Mac properly and control them masterfully at the aforementioned time.

Why Bluetooth headphones won't connect to Mac

There are a few common problems we need to explore:

1. Bluetooth headphones won't connect to Mac right out of the box — some configuring is needed
2. Pairing Bluetooth headphones with Mac is different from pairing them with iPhone or your car's sound arrangement
3. Special settings that respond questions like how to connect two Bluetooth headphones to one Mac and how to use multiple audio outputs

Throughout the article, AirPods would be used as an example, but any other model of Bluetooth headphones tin can exist continued in a similar fashion.

How to pair wireless headphones to Mac

Connecting Bluetooth headphones to Mac for the first time is washed by following a few easy steps:

1. On your Mac, click on the Apple bill of fare and launch System Preferences
2. Navigate to the Bluetooth menu and Turn Bluetooth On. You should now see all available Bluetooth devices effectually you.
3. Make certain your headphones are charged and currently in discoverable mode. Click Connect to institute a new connectedness
4. Your Bluetooth headphones should now appear in the list. Click Connect to establish a new connectedness.
5. If you're trying to reconnect your existing device, right-click on it and cull Connect

After you've managed to successfully connect Bluetooth headphones to Mac for the first time, they should stay connected or reconnect automatically when yous get out the Bluetooth range (around 33 anxiety or ten meters) and come back.

You can also calibrate headphones to your liking through the Sound carte du jour in Organization Preferences. For example, in the Output tab y'all tin can cull to "Show volume in menu bar" and fix a stereo balance between right and left.

Oftentimes things don't go as planned, then let's work through some widespread problems regarding Bluetooth headphones.

How to connect AirPods to Mac

We'll outset with the easiest method: install AirBuddy and pair AirPods with Mac using a handy pairing screen (similar to the one you get on iOS). All it takes is bringing your AirPods close to your Mac and opening the lid. Then, you'll see a screen similar this:

From in that location, information technology'south pretty straightforward. Hit the "Click to connect" button and that's information technology. The dazzler of AirBuddy is that you don't have to dive into any settings to pair your device.

If you don't have AirBuddy, you can rely on Apple's native connection flow.

Hither's how you lot connect new AirPods to Mac:

1. Open Arrangement Preferences on your Mac and select Bluetooth.
2. Ensure Bluetooth is turned on.
3. On AirPods, press and hold the round button (it's at the bottom center of the case) until the white light starts blinking.
4. Your Bluetooth headphones should now appear in the list.

In case you've already paired AirPods with your iPhone that's tied to the same iCloud account and Apple tree ID, your earbuds will be automatically recognized by Mac.

If yous want an easy tool for pairing multiple headphones simultaneously, install ToothFairy. You tin can set upwards custom icons for different headphones then they're like shooting fish in a barrel to recognize. To connect, simply click on the icon. You can read more than about how to employ the app beneath.

How to fix Bluetooth headphone issues

Sometimes going through the setup steps doesn't consequence in your headphones connecting successfully, or connecting and and then abruptly disconnecting. This is profoundly annoying but tin can be solved past either resetting the headphones or purging preference settings on your Mac. Hither's how to fix all known issues:

Restart your Bluetooth headphones

In case yous can't connect your Bluetooth headphones not only to your Mac but too any other device you ain (iPhone or car audio), it might be a glitch in its settings, and then a unproblematic reset should remedy the state of affairs.

For reset instructions, check your device's manual. Here's how to reset AirPods:

1. Put the earpieces into the case and keep the lid open
2. Press and concord the setup push until the light switches from amber to white (around 10 seconds)

At present all settings on your earphones should be reset and you should be able to connect them once more using the standard workflow in a higher place. If the problem persists, information technology could be something to practice with the preferences on your Mac.

Reset sounds preferences on Mac

First, make sure that your Mac is running macOS Sierra or newer (macOS High Sierra or Mojave). If not, upgrade to the latest version past going to System Preferences > Software Update or using the App Store if y'all're upgrading from a few versions back.

Adjacent, if naught was of any benefit and then far, try resetting your Mac'due south audio preferences. To do that:

1. From the carte du jour bar select Go > Go to Folder… and type ~/Library/Preferences
2. In the long list of preference files, observe and delete the following: com.apple.preferences.plist and com.apple tree.soundpref.plist

Deleting preferences out of the library forces your Mac to recreate them brand new, thus fugitive any bugs or improper algorithms that could have interfered with your Bluetooth headphones setup. If that didn't work, you lot tin likewise try relaunching the sound process:

1. Launch Action Monitor from the Applications folder
2. In the CPU tab, discover the process chosen coreaudiod
3. Quit the process and close Activeness Monitor

The in a higher place would strength non merely the preferences for your audio to reset just as well the audio process for your whole Mac to relaunch.

No sound from a paired and connected Bluetooth headset

Occasionally, when yous succeeded in connecting Bluetooth headphones to Mac, you lot might hear no sound going through. In that location are a few things you can do to solve this.

Ensure that your headphones are the selected audio output for your Mac:

1. Go System Preferences > Sound
2. In the Output tab, find your headphones in the listing and double-click to brand them active

If that didn't change annihilation:

1. Reset your headphones as per the directions above
2. Go Organization Preferences > Bluetooth
3. Right-click on your headphones, choose Remove, and ostend

Now you lot need to connect Bluetooth headphones to Mac all over again, and the trouble should disappear.

Tin't connect ii Bluetooth headphones Mac recognizes

The beauty of Mac's Bluetooth menu is that it lets you add any number of Bluetooth-enabled devices, from keyboards to headphones. Sometimes, still, it might malfunction and not permit y'all to add 2 wireless headphones at the same time.

To gear up this result, substantially repeat the steps from the previous section:

1. Reset each pair of headphones
2. Remove them from Mac'south Bluetooth menu
3. Reconnect your headphones again

If, yet, you're looking for how to use multiple audio outputs, such as headphones, at the same fourth dimension — here some magic tricks are required.

How to utilize multiple audio outputs simultaneously

Virtually Mac users believe that they tin only play their audio output through one device at a time, exist it internal speakers, Bluetooth headphones, or some other amplifier. But in reality it'south possible to play sound on multiple devices at the same fourth dimension through a handy born utility chosen Audio MIDI Setup. Here's what you lot need to do:

1. Launch Audio MIDI Setup through Applications
2. Click the plus icon at the lesser left and choose Create Multi-Output Device
3. In the new selection that appears, check all the Bluetooth devices you lot need to play simultaneously
4. Navigate to the Audio menu in System Preferences and choose the Multi-Output Device in the Output tab. Now all sounds will play through both devices at the same fourth dimension.

Playing audio through multiple devices is a keen flim-flam for when yous need more than sound power for your party or when trying to create a truthful environs sound for a motion-picture show screening.

Use master Bluetooth software for all needs

Most of the time, sound on Mac is not an issue. What'southward frustrating is the way current settings are sprinkled all over macOS. Lots of fixes described here might seem confusing and unintuitive at showtime sight. Yous might wish there was an app that would make it easy to control all your audio needs from a single identify.

And there is not just ane such app, only two!

As we've mentioned, we honey AirBuddy, an app that brings the ease of headphones pairing from iOS to macOS. Equally long every bit you lot're logged in your iCloud account, y'all don't have to do any manual pairing, just bring your headphones close to Mac and click "Connect."

Another useful helper is ToothFairy — the nigh simple Bluetooth device assistant for setting up multiple headphones connections.

To set upward a new device in ToothFairy, all y'all need to do is:

1. Open the app
2. Click the plus icon
3. Locate your device in the list and click Connect

Similarly, it's merely as easy to assign custom icons to all your frequently used devices and get them displayed in the bill of fare bar, so you instantly know which devices are connected, what'southward their bombardment life, and tin chop-chop plow them on and off with one click.

Additionally, ToothFairy offers a unique choice of improving the audio quality of your Bluetooth headphones by funneling the sound through a higher level audio codec.

In the stop, it seems similar wireless headphones are hither to stay. So finding a master program to control them with ease is going to save your hours of time in the long run. Apply the tips above to configure your headphones, easily connect AirPods to MacBook, and accept advantage of AirBuddy and ToothFairy for best results.

How to disconnect Bluetooth headphones from a Mac

To disconnect your headphones from your Mac, you lot just need to perform 2 steps.

1. Click the Bluetooth icon in your Menu bar.

2. Observe your headphones on the list of the continued Bluetooth devices and click the blue icon next to the name to disconnect:

You tin also disconnect via System Preferences. This method can be your get-to if you don't desire to have the Bluetooth icon in your Carte du jour bar.

Only like when y'all connect wireless headphones to MacBook, you have to become to the Apple card > System Preferences… > Bluetooth and find your headphones on the list of the connected Bluetooth devices there, then ii-finger click on the item you want to disconnect and select Disconnect in the drop-downwards carte.

Alternatively, you can plow off Bluetooth with the toggle, which will automatically disconnect all of your connected Bluetooth devices.

How to connect your Bluetooth headphones via Control Center (Big Sur and subsequently)

Control Centre was introduced with macOS Large Sur, so you might not realize that you can really connect your Bluetooth devices there.

Here'south how to connect earbuds or headphones to MacBook if y'all are running macOS Big Sur or fresher.

1. Click the Command Center icon at the right side of your Bill of fare bar (it looks like two toggle confined — one off, and the other on).
2. Turn on Bluetooth past clicking the respective icon on the left of the give-and-take Bluetooth and await for information technology to turn blue to signify that Bluetooth is on.
3. Next, click on the word Bluetooth to open up the Bluetooth menu and find your headphones on the listing (your Bluetooth headphones need to exist on and in the discoverable style for this to work). Click on them to connect.

All-time of all, AirBuddy and ToothFairy are available for a free trial through Setapp, a platform of over 200 useful utilities and apps for people who dearest finding the best shortcuts for using their Macs. At present enjoy the audio!

walkerreearly.blogspot.com

Source: https://setapp.com/how-to/connect-bluetooth-headphones-to-mac

Share this post